background image

6

Booklet Structure

SHIMANO STEPS user's manuals are split among several booklets, as described below.

Be sure to read these user's manuals thoroughly before use, and follow them for correct use. Store the user's manuals so that 
they can be referenced at any time.

The latest user's manuals are available on our website (https://si.shimano.com).

 

SHIMANO STEPS user's manual 

This is the basic user's manual for SHIMANO STEPS. It contains the following content.

 

- SHIMANO STEPS quick guide

 

- How to operate assist bicycles that use flat handlebars, such as city, trekking, or MTB type bicycles

 

- Troubleshooting

 

SHIMANO STEPS user's manual for drop handlebar bicycles (separate booklet)  

This booklet describes how to operate assist bicycles that use a drop handlebar and are controlled using a dual control 
lever. This should be read along with the SHIMANO STEPS user's manual.

 

SHIMANO STEPS special battery and parts user's manual 

It contains the following content.

 

- How to charge and handle the SHIMANO STEPS special battery

 

- How to attach and remove the SHIMANO STEPS special battery to the bicycle

 

- How to use the satellite system on/off switch and satellite charging port

 

- How to read the battery LEDs when charging or during an error, and how to handle errors

 

Cycle computer user's manual (this document) 

It contains the following content.

 

- Basic operations of the cycle computer and how to configure settings

 

- Wireless communication method

 

- How to handle errors/warnings and cycle computer troubleshooting

 

Switch unit user's manual 

This is the assist switch and shifting switch user's manual. Describes switch unit operations.

Содержание SC-EM800
































Отзывы: