26
Switching the travel data display (SC-E8000/SC-E6010)
* The Walk assist mode function may not be able to be
used in certain regions.
The type of travel data displayed changes each time you
press Assist-A or the cycle computer's function button.
Assist
A
Function button
(A)
Traveling distance
(B)
Cumulative distance
(C)
Traveling range *1, 2
(D)
Traveling time *3
(E)
Average speed *3
(F)
Maximum speed *3
(G)
Number of crank rotations *3
(H)
Current time *3
(A)
[DST]
[CLOCK]
(H)
(B)
[ODO]
[CADENCE]
(G)
(C)
[RANGE]
[MAX]
(F)
(D)
[TIME]
[AVG]
(E)
*1
When [RANGE] is displayed, the battery level is not displayed. The traveling range should be used as a reference only.
*2
When walk assistance is functioning, the on screen display [RANGE] changes to [RANGE ---].
*3
Optional item: You can configure the display settings in E-TUBE PROJECT. For details, refer to the "Connection and
communication with devices." section.
*4
Displayed constantly on SC-E6010.
NOTICE
When traveling data is displayed, the screen returns to speed display after 60 seconds.
When speed data is displayed, pressing Assist-A or the function button changes the traveling data displayed starting
with [DST].
