43
12. Units
Read Chapter 7 Before Use of
These Pages
12. Units
12.1 Unit Display Set-up
The UW/UX series balance can display weighed results in various weighing units.
1
It is possible to display units other than “g”.
Press the
[UNIT]
key in mass display to sequen-
tially change the selected units.
2
Before weighing, set the display units to be
used. Gram, %, and PCS (piece counting) are set
up before shipment. Set up the desired units by
selecting menu from
to
.
For details of PCS and specific gravity measure-
ment, refer to
Error Display
(Example)
When menu item
(carat) has
been selected.
58
54
62
Notes
For the unit names, refer to the menu map.
• In the unit setting menu, the stability symbol is illuminated to indicate the
currently set units.
• Set or release the unit by pressing the
[O/T]
key when the unit is dis-
played. Gram cannot be released.
User unit (menu item
): A numeric value (multiplier) is multiplied by the
gram (g) weight of the unit.
Display Overload: This display appears if the mass display exceeds 7 digits
due to the choice of unit.
62
