Shimadzu TW223L Скачать руководство пользователя страница 24

Страница: 24 / 158

BEFORE WEIGHING

Choosing the Installation Site

The measuring performance of the balance is greatly influenced by the environment where it is

installed.
Observe the following points to ensure safe and accurate weighing.

Caution

Prohibitions

Do not use the balance anywhere

exposed to explosive, combustible

or corrosive gases.

This could cause fire or trouble.

Instructions

Use the correct power supply and voltage with the balance.

Using an incorrect power supply or voltage with the balance will lead to fire or trouble

with the balance.
Note also that if the power supply or voltage is unstable or if the power supply capacity

is insufficient, it will not be possible to obtain satisfactory performance from the

balance.

Precautions on Use

Prohibitions

Avoid locations where the balance will be exposed to any of the

following.

Air flow from an air conditioner,

ventilator, door or window

•



Installation

Содержание TW223L































































































































































Результаты поиска

Содержание TW223L

Отзывы:

Shimadzu TW223L, Инструкция по эксплуатации, Страница: 24 / 158

Результаты поиска

Содержание TW223L

Отзывы: