80
6.2
Unit Cleaning
Warning
●
Always disconnect the power cable before cleaning the product.
Failure to do so may result in electric shock.
Do not use volatile solvents (paint thinner, benzene, etc.) or a damp cloth to clean the product.
Use a soft, dry cloth. Failure to do so may result in rusting or damage.
Avoid getting this product wet with water.
Failure to do so may result in rusting or damage.
Follow the procedure below to clean the camera head.
1.
Clean away any dust from around the camera head and control computer.
When cleaning these areas, be careful not to scratch the control computer
monitor.
2.
Use a soft dry cloth to remove any dirt.
3.
Use a vacuum cleaner to clean around the air intake port.
Fig. 6-1 Cleaning the Air Intake Portc
✐
Note
