30
7. Menu Item Selection
7.4 Useful Functions Related to Menu
7.4.1
Settings Check Display
From mass display, press the
[CAL]
key four times to display the confirmation of the current settings.
Displayed as abbreviations are the three kinds of environmental settings(see
), ON/OFF for the
fully-automatic span calibration(see
,
), and ON/OFF for the GLP/GMP/ISO compliant cali-
bration report output.(see
)
The weight symbol appears when either or both of the fully-automatic span calibration PSC or Clock-
CAL are on.
7.4.2
Returning to Default Settings (Menu reset)
This will return all the settings to default. The reference value stored in previous use of piece counting
or percentage conversion and the set time of Interval Timer function will also be cleared. The default
settings are indicated with “#” on the Menu Map.
1
Press the
[CAL]
key repeatedly until “SEttinG”
appears. Press the
[O/T]
key. The display shows
“CAL dEF”.
2
Press the
[CAL]
key repeatedly until the dis-
play shows “rESEt”. Press the
[O/T]
key. The dis-
play shows “rESEt?” for confirmation.
3
Press the
[O/T]
key one more time.
Stability and response setting
St : Standard mode
Co : Anti-convection mode
Hi : High-stability mode
Po.n : Pouring mode (normal environment)
Po.S : Pouring mode (very stable environment)
Po.U : Pouring mode (unstable environment)
Stability detection band setting
b1 : 1 count
b5 : 5 count
b10 : 10 count
Appears when
zero tracking is on
Appears when the fully-automatic span calibration
PSC or Clock-CAL is on.
Appears when the calibration report output is on
⎛ ⎞
⎜ ⎟
⎜ ⎟
⎝ ⎠
⎛ ⎞
⎜ ⎟
⎜ ⎟
⎜ ⎟
⎜ ⎟
⎜ ⎟
⎝ ⎠
...
