4
2. Component Names and Functions
For Basic Operation
2.3 Balance Display and Functions
Display
Name
Description
Stability mark
Indicates that the weighed value is stable. In menu selection, indicates the
currently selected item.
Tare symbol
Indicates that Taring has been made at over 2.0% of the capacity.
Zero symbol
Note: Using a verified balance as a legal measuring instrument in the EU:
Indicates that the balance is set exactly to “Zero” with the zero-setting function
(within ±0.25e: e = verification scale interval).
Weight symbol
Appears during span calibration. Blinks before automatic calibration starts.
Blinks to advise necessity of span calibration.
[ ]
Bracket
Note: Using a verified balance as a legal measuring instrument in the EU:
The figure(s) bordered by the bracket is(are) the auxiliary indicating device.
Number symbol
Indicates numeric value entry.
Menu symbol
Appears during menu selection. Always shown when the menu is locked.
Add-on symbol
Indicates set-up of Add-on mode or Formulation mode.
Memory symbol
Indicates set-up of Formulation mode.
Communication
symbol
Indicates communication with external devices via RS-232C cable or Data I/O
connector. Shown when communication functions are ON.
Battery symbol
Indicates a low battery voltage when using the balance with the optional bat-
tery pack.
Auto Print symbol
Indicates set-up of the Auto Print function.
Standby mark
Appears during standby status. Indicates standby of the interval timer output
function.
Inverse triangle
Illuminates as part of the solid specific gravity measurement display.
Bar graph display section
Units display section
(Some of the symbols and characters on the balance display are not used by this balance.)
Bar graph display section
