Shihlin SA3 Series, Руководство пользователя

Страница: 97 / 423

System parameter group 00
PARAMETER DESCRIPTION 95
5.1.10 Control mode selection

Select the control mode by setting 00-20(P.400).
Parameter Name Default Setting Range Content
00-20
P.400
Control mode selection 0
0 Speed control
1 Torque control
2 Position control
Control mode selection

If 00-20(P.400) = 0, torque control is off, and inverter runs speed control in closed-loop vector; 00-20(P.400) = 1,
torque control is on, and inverter runs torque control. In torque control, inverter needs to work in closed loop vector
control mode, so a speed measuring encoder must be installed.

The combination of using 00-20(P.400) control mode selection with digital input function : control mode switch
(03-00
(P.83)
= 55/63) is shown as the following sheet.
00-20(P.400)
Digital input function
Control mode
speed/torque switch (03-00(P.83) = 55) position/speed switch (03-00(P.83) = 63)
0 Terminal function not set
Terminal function not set
Speed control
1
Terminal function not set
Terminal function not set
Torque control
2
Terminal function not set Terminal function not set
Position control
0 Terminal function set and signal given --- Torque control
0 Terminal function set and signal not given --- Speed control
2 --- Terminal function set and signal given Position control
2 --- Terminal function set and signal not given Speed control
5.1.11 Motor control mode selection

Choose control mode for the AC motor.
Parameter Name Default Setting Range Content
00-21
P.300 Motor control mode
selection
0
0 Induction motor V/F control
1 Induction motor closed-loop V/F control (VF + PG)
2 Induction motor simple vector control
3 Induction motor sensorless vector control
4 Induction motor PG vector control
5 Synchronous motor PG vector control
6 Synchronous motor vector control without PG
00-22
P.370 Second motor control
mode selection
99999
0 Induction motor V/F control
1 Induction motor close-loop V/F control (VF+PG)
2 Induction motor simple vector control
3 Induction motor sensorless vector control
4 Induction motor PG vector control
5
Synchronous motor PG vector control
6 Synchronous motor vector control without PG
99999 Off
Setting