Shihlin electric SL3 Series, Руководство пользователя

Страница: 73 / 211

Basic Parameter Group 01
PARAMETER DESCRIPTION 71
5.2.10 Second function

When given RT signal, these parameters will work.
Parameter Name Default Setting Range Content
01-22
P.44
Second acceleration
time
99999
0～360.00s/0～
3600.0s
01-08(P.21)=0/
01-08(P.21)=1
99999 Off
01-23
P.45
Second deceleration
time
99999
0～360.00s/0～
3600.0s
01-08(P.21)=0/
01-08(P.21)=1
99999 Off
01-24
P.46
Second torque boost 99999
0～30.0% ---
99999 Off
01-25
P.47
Second base
frequency
99999
0～599.00Hz ---
99999 Off
Second function

When 01-08(P.21)=0, minimum acceleration / deceleration time 01-22(P.44), 01-23(P.45) increment is 0.01s.

When 01-08(P.21)=1, minimum acceleration / deceleration time (01-22(P.44), 01-23(P.45)) increment is 0.1s.
When RT is “on”, second function is valid. For the motor operation characteristics, please refer to the following
second function setting.
If 01-22(P.44)≠99999 and 01-23(P.45)=99999, when RT is “on”, acceleration /deceleration time is the “set value
of 01-22(P.44)”.
If 01-22(P.44)≠99999 and 01-24(P.46)=99999, when RT is “on”, torque boost is the “set value of 01-10(P.0)”.
If 01-22(P.44)≠99999 and 01-24(P.46)≠99999, when RT is “on”, torque boost is the “set value of 01-24(P.46)”.
If 01-22(P.44)≠99999 and 01-25(P.47)=99999, when RT is “on”, base frequency is the “set value of 01-03(P.3)”.
If 01-22(P.44)≠99999 and 01-25(P.47)≠99999, when RT is “on”, base frequency is the “set value of 01-25(P.47)”.
Note: RT mentioned here is the function name of “multi-function digital input terminal”. Please refer to 03-00(P.83),
03-01(P.84), 03-03(P.80), 03-04(P.81) for function selection of multi-function digital input terminal; please refer to
Section 3.7.
Setting