Shihlin electric SL3 Series, Руководство пользователя

Страница: 63 / 211

Basic Parameter Group 01
PARAMETER DESCRIPTION 61
5.2.1 Limiting the output frequency

Output frequency can be limited. Fix the output frequency at the upper and lower limits.
Parameter Name Default Setting Range Content
01-00
P.1
Maximum frequency 120.00Hz
0.00～01-02
（P.18）Hz
--
01-01
P.2
Minimum frequency 0.00Hz 0～120.00Hz Output minimum frequency
01-02
P.18
High-speed maximum
frequency
120.00Hz
01-00（P.1）～
599.00Hz
Set when need inverter to run over 120Hz
Maximum frequency, high-speed maximum frequency

The “maximum frequency” and the “high-speed maximum frequency” are interrelated:
1.
If the target frequency upper limit is set below 01-00(P.1), use 01-00(P.1) as the maximum frequency;
2. If the target frequency upper limit is above 01-00(P.1), use 01-02(P.18) as the maximum frequency.

If 01-00(P.1)< 01-01(P.2), the steady output frequency will be fix at 01-00(P.1) value.

When setting the target frequency in PU mode, the frequency set value cannot exceed the value of 01-00(P.1).
Minimum frequency

If the target frequency≤01-01(P.2), the steady output frequency equals to = 01-01(P.2).

If 01-01(P.2)<target frequency≤01-00(P.1)/(01-02(P.18)) , the steady output frequency equals to target frequency.
01-00(P.1)
/01-02(P.18)
01-01(P.2)
Steady
output
frequency
（
Hz
）
Target
frequency
（
Hz
）
Setting
Setting