Shihlin electric SL3 Series, Руководство пользователя

Страница: 32 / 211

Component name of keypad
BASIC OPERATION 30
4. BASIC OPERATION
4.1 Component name of keypad
（
b
）
（
c
） （
a
）
8.8.8.8.8
（
j
）
（
i
） （
f
）
（
d
）
（
e
）
（
h
） （
g
）
NO. Operation parts Name Content
(a) Operation mode indicator
PU: On when in PU/JOGoperation mode, flickers in H1~H5
operation mode.
(b) Keypad status indicator MON：On to indicate keypad is in monitoring mode
(c) RUN indicator Flickers when running.
(d) Unit for the monitoring value
Hz: On when monitoring frequency.
A: On when monitoring output current.
V: On when monitoring optional values (output voltage by
default). Can be set by 00-07（P.161）to monitor different
values.
(e) MODE/RESET button
Switch the display screen（Switches to different operation
modes）
Long press to reset the inverter when alarm.
(f) RUN/STOP button
When inverter is in stop state this button gives run command.
When inverter is in run state this button gives stop command.
(g) UP/DOWN button
Increase/Decrease frequency, parameter number, parameter
value,etc.
(h) SET button
Long press this key to write parameter values, frequency, etc.
Short press this key to read the parameter value. Enter the
next menu.
(i) VR knob Set target frequency
(j) Monitor (5-digit LED)
Shows the frequency, parameter number, and parameter
value, etc.