RV Bank
(Reverbs)
In this bank, the PDL/Time knob and the TAP footswitch always set the pre-delay for reverb reflections at a ratio of
1:16 relative to the set tempo (taking the BEAT switch position into account).
The LPF and HPF knobs affect the output in each algorithm featured in the RV bank. All the algorithms in this bank
can be split into several subgroups:
Classic Reverbs
1.
Spring
. Spring reverb with a classic resonant character. The CHARACTER knob controls the brightness and
intensity of the effect, taking it from a traditional mild studio effect to the bright sound of Fender® spring
reverbs.
2.
Plate
. The plate reverb was one of the first implementations of the effect and has found its way to countless
studio records over the years. The CHARACTER knob controls the size and other parameters of the plate.
3.
Room
. Strictly speaking, this isn’t just a room reverb: depending on the DECAY and CHARACTER knob positions,
you can get anything from very short ambience to large hall-like soundscapes. The CHARACTER knob controls
the initial reflections.
4.
Modulated
. A well-known reverb type in which reverb reflections are modulated. The CHARACTER knob controls
modulation depth, while the PDL/TIME knob sets LFO speed along with pre-delay time.
