Shibaura GM222, Инструкция по эксплуатации и список запасных частей

Страница: 42 / 49

40
Battery Removal Procedure (With self-starter)
Do not charge a frozen battery.
Do not allow any short-circuit between the
positive and negative poles by a piece of metal.
Do not allow any naked flame close to the
battery. Otherwise, it might cause an explosion.
<Battery Removal Procedure>
When the battery and its cables are removed for charging
or long-term storage, proceed as follows.
Set the engine switch to “O” position, and loosen the set
bolts and nuts on the positive and negative poles.
First remove the black cable from the negative pole, then,
remove the red cable from the positive pole.
When the cables are to be attached to the poles, first
attach the cable to the positive pole. Otherwise, if the
tool should touch the pole, a short-circuit is caused.
Loosen the double nut fixing the battery and remove the
battery.
DANGER
Battery fluid is diluted sulfuric acid and harmful
to the human body.
When the battery is removed or the distilled
water replenished, wear protective glasses and
rubber gloves.
If battery fluid should enter your eye or mouth,
wash it away with large quantity of water and
consult a doctor.
WARNING
When charging the battery, carefully read the
instruction label attached to the battery.
When charging, remove the battery from the
body of the machine.
IMPORTANT
Maintenance