Sherpa SX-MD16E, Руководство пользователя

Страница: 3 / 14

II. Structure and Features
Structure: This sprayer consists of a tank, base, battery,
mini-pump, charger, spraying system, volt meter, rubber
tubes, switch, spraying lance, nozzles and straps, and
trailer.
Features
：
The spray tank is ergonomically designed to fit the
human back comfortably or capable of connecting with
the trailer for easy towing, it’s easy to assemble and
disassemble.
Fitted with a high-pressure large flow pump to work
with nozzles of various functions, the atomization
pressure is between 2-4.5 bar, to suit the demands of
many application types, with various nozzles to
maximize productivity and cost-savings.
Equipped with a compact light weight, high pressure,
diaphragm pump for even atomization and overload
protection to extended service life.
A voltmeter and low-battery alarm circuit for precise
and clear indication of battery voltage. The alarm will
give an audible warning when the battery voltage falls
below 11V, to indicate the battery requires recharging.
The sprayer should be switch off to prevent
over-discharging to extend the service life of the
battery.
Supplied with a dedicated three-stage battery charger
(constant current, constant voltage, float maintaining
）
The indicator lamp
：
red
—
charging
；
green
—
full/stand-by (Never switch off at mains and leave
charger connected to the Sprayer) this can shorten
service life of the battery.
Designed to be low fatigue and user-friendly, the
sprayer can be carried on your back or wheeled on its
trailer. The trailer features a telescopic handle that can
be varied depending on the user height for easy
operation.