Sherpa SX-MD16E, Руководство пользователя

Страница: 12 / 14

Cleaning and Maintenance
After every spraying operation, the
Sprayer should be cleaned to avoid
corrosion of internal parts and blockages
of the nozzles caused by chemicals. In
addition, proper cleaning can also avoid
the risk of contaminating other chemical
agents being sprayed in future operations
that may bring harm to plants and crops.
How to clean ：
·
Clean the outer surface of the Sprayer with a wet cloth.
Fill the tank with clean water and replace the lid, shake
the sprayer, then turn on the power switch to spray the
cleaning water via the nozzle.
·
The tank strainer can be removed for cleaning.
Warehousing / Storage
The Sprayer should be stored indoors,
upright in a dry place and out of reach of
children. Ensure the Pump is switched off;
Charge the battery once every 4 weeks.
Always disconnect the charging cable
from the sprayer control panel after
charging to prevent damage to battery
and charger.
SN Des cr i pt i on Qt y SN Des cr i pt i on Qt y
44 Fus e cap 1 58 cr os s r eces s ed pan head
s el f - t appi ng s cr ew ST2.9
×
16
5
45 cr os s r eces s ed pan head
s cr ew M6 × 12
6 59 t r ay 1
46 Char gi ng s ocket 1 60 l ocki ng nut 2
47 wat er - s hi el d 1 61 l ocki ng cap 2
48 end- cover 1 62 pul l r od 1
49 s ocket nut 1 63 Handl e 1
50 back pad 1 64 s t r ap l ock 4
51 back pad buckl e 4 65 s t r ap 2
52 wheel cover 2 66 s t r ap hook 2
57 t r ai l er f r ame 1 67 Char ger 12 V 1
53 ci r cl i p f or s haf t 10 2 68 30° dual spray head 1
54 f l at was her 10 2 69 Four - hol e adj us t abl e s pr ay
head
1
55 wheel 2 70 Cone s pr ay head 1
56 wheel s haf t 1
Fig. 17
Fig. 16