background image

深圳市欧深特信息技术有限公司

Shenzhen Ousent Technologies CO.,LTD

Add: Floor 2 Building 1 Shunheda Industrial Area. 72Block Baoan District. Shenzhen City Guangdong P.R. CHINA
Tel: (+86) 755 27889675

Fax: (+86) 755 27889675 ext 808

Website: www.ousent.com

1

Brief introduction

Many thanks for purchasing 10/100/1000M SFP Fiber Ethernet Media Converter!
This product supports IEEE802.3u 1000Base-Tx/Fx protocol, as well as full duplex and half duplex mode. Be designed with a switch
controller and buffer memory that connect two types segments operation smoothly. IT can be used as standalone unit or as slide-in
module to the 19 Inch Converter Rack Chassis ( only for external power product).
This manual is for 10/100/1000M SFP Media Converter. The following purchasing guide is for customer’s reference.

Purchasing guide for optical transceivers

Model

Specifications

OS-MC12-SFP

10/100/1000M adaptive,SFP Media Converter

Packing list

Please check the following items in the package before installing the transceiver.

Packing Item

Quantity

Fiber Ethernet SFP Media Converter

1 SET

AC/DC adapter (for external power unit only)

1 PCS

Power line

(for internal power unit only)

1 PCS

User manual

1 COPY

10/100/1000M SFP Fiber Media Converter

User Manual

Please contact the dealer immediately for any loss or damage to the above items.

Содержание OS-MC12-SFP






Отзывы: