05_62807_62810_A2
Page 11
10. instAllinG tHe cover on tHe FrAMe
A
B
a
b
c
D
A
. Lay the cover on the ground next to the
frame with the inside of the cover (the side
with the pipe pockets) facing down and the
webbing on the front and rear of the corner
of the building. Position the cover so that it is
centered to the frame, front to back. Fig. A
B.
Fold over the side closest to the frame so
the pipe pocket is now accessible. Temporarily
insert a cover rail (#801345) at the first middle
rib from the front
(
a
) and the first middle rib
from the rear
(
b
) so that it is inserted in the pipe
pocket on both ends of the pipe but the center
of the pipe is exposed. Fig. B.
C.
Tie the rope on each of the exposed pipes
and throw the other end of the rope over the
frame. Fig. C.
D.
Move to the other side of the frame and pull
the cover over the frame with the rope. This
may require two or more people.
Fig. D.
