shelolab SMO5HP-2, Руководство по эксплуатации и установке

Страница: 28 / 42

28 | P a g e
OPERATION
S
ETTING THE
C
ONSTANT
T
EMPERATURE
S
ET
P
OINT
H
EATING
P
ROFILE
R
ECIPES
Please see the Programing Guide – Watlow EZ-Zone Controller Heating Profiles document for instructions
on how to program automated heating recipe profiles. The illustrated guide comes included with the oven
and provides explanations for all major heating profile functions and programming steps.
1.
Adjust the constant temperature set point on the home page
Adjust
•
Do not exceed the high limit temperature set point.
Note : Holding down an arrow button will cause the temperature to advance in
increments of ten (10).
2.
Release the Arrow buttons after adjusting the Set Point
•
There may be a brief pause as the oven controller
calculates the optimum power usage to achieve the
set point starting from the current oven chamber
temperature.
•
A small illuminated 2 near the bottom of the display
indicates the temperature controller is calling for
heat.
Oven Heating