USER GUIDE
Smart WiFi LED Controller
Power supply:
110-230V ±10, 50/60Hz AC
Output power:
• 1 x 40W/ 90Vx500mA
• 2 x 20W/ 90Vx250mA
Dimming:
From 0 to 100%
Complies with EU standards:
• RE Directive 2014/53/EU
• LVD 2014/35/EU
• EMC 2004/108/WE
• RoHS2 2011/65/UE
Working temperature:
From -10°C to 50°C
Radio signal power:
1mW
Radio protocol:
WiFi 802.11 b/g/n
Frequency:
2400 – 2500 MHz;
Operational range (depending on local construction):
• up to 40 m outdoors
• up to 20 m indoors
Dimensions (HxWxL):
89 x 89 x 31 mm
Electrical consumption:
< 1 W
The LED Smart WiFi Controller Shelly® by Allterco Robotics
is intended to be installed directly to a LED strip/light in order
to control the white light temperature and to dim the light.
Shelly may work as a standalone device or as an accessory
to a home automation controller.
Technical Information
• Control through WiFi from a mobile phone, PC, automa-
tion system or any other Device supporting HTTP and/or
UDP protocol.
• Microprocessor management.
• Controlled elements: multiple LED diods.
• Shelly may be controlled by an external button/switch.
CAUTION!
Danger of electrocution. Mounting the
Device to the power grid has to be performed with
caution.
CAUTION!
Do not allow children to play with the
button/switch connected the Device. Keep the De-
vices for remote control of Shelly (mobile phones,
tablets, PCs) away from children.
Introduction to Shelly
®
Shelly
®
is a family of innovative Devices, which allow remote
control of electric appli-ances through mobile phone, PC or
home automation system. Shelly
®
uses WiFi to connect to
the devices controlling it. They can be in the same WiFi net-
work or they can use remote access (through the Internet).
Shelly
®
may work standalone, without being managed by a
home automation controller, in the local WiFi network, as well
as through a cloud service, from everywhere the User has
Internet access.
Shelly
®
has an integrated web server, through which the User
may adjust, control and monitor the Device. Shelly
®
has two
WiFi modes - access Point (AP) and Client mode (CM). To
operate in Client Mode, a WiFi router must be located within
the range of the Device. Shelly
®
devices can communicate
directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly
®
devices
may be available for monitor and control even if the User is
outside the range of the local WiFi network, as long as the
WiFi router is connected to the Internet. The cloud function
could be used, which is activated through the web server of
the Device or through the settings in the Shelly Cloud mobile
application.
The User can register and access Shelly Cloud, using either
Android or iOS mobile applications, or any internet browser
and the web site:
https://my.Shelly.cloud/
.
Installation Instructions
CAUTION!
Danger of electrocution. The mounting/
installation of the Device should be done by a qual-
ified person (electrician).
CAUTION!
Danger of electrocution. Even when the
Device is turned off, it is possible to have voltage
across its clamps. Every change in the connection
of the clamps has to be done after ensuring all local power
is powered off/disconnected.
CAUTION!
Do not connect the Device to appliances
exceeding the given max load!
CAUTION!
Connect the Device only in the way
shown in these instructions. Any other method
could cause damage and/or injury.
CAUTION!
Before beginning the installation please
read the accompanying documentation carefully
and completely. Failure to follow recommended
procedures could lead to malfunction, danger to your life or
violation of the law. Allterco Robotics is not responsible for
any loss or damage in case of incorrect installation or oper-
ation of this Device.
CAUTION!
Use the Device only with power grid and
appliances which comply with all applicable regu-
lations. short circuit in the power grid or any appli-
ance connected to the Device may damage the Device.
RECOMMENDATION:
Тhe Device may be connect
-
ed to and may control electric circuits and appli-
ances only if they comply with the respective
standards and safety norms.
RECOMMENDATION:
The Device may be connect-
ed to and may control electric circuits and light
sockets only if they comply with the respective
standards and safety norms.
Initial Inclusion
Before installing/mounting the Device ensure that the grid is
powered off (turned down breakers).
Connect the Shelly to the power grid following the wiring
scheme above (fig.1)
You may choose if you want to use Shelly with the Shelly
Cloud mobile application and Shelly Cloud service. You can
also familiarize yourself with the instructions for Manage-
ment and Control through the embedded Web interface.
Control your home with your voice
All Shelly devices are compatible with Amazon Echo and
Google Home.
Please see our step-by-step guide on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
MOBILE APPLICATION FOR
MANAGMENT OF SHELLY
®
Shelly Cloud gives you opportunity to control and adjust all
Shelly
®
Devices from anywhere in the world.
You only need an internet connection and our mobile applica-
tion, installed on your smartphone or tablet.
To install the application please visit Google Play (Android - fig.
2) or App Store (iOS - fig. 3) and install the Shelly Cloud app.
fig. 2
fig. 3
Registration
The first time you load the Shelly Cloud mobile app, you have to
create an account which can manage all your Shelly
®
devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail
address you have used in your registration. You will then re-
ceive instructions to change your password.
WARNING!
Be careful when you type your e-mail
address during the registration, as it will be used in
case you forget your password.
After registering, create your first room (or rooms), where you
are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for auto-
matic turning on or off of the Devices at predefined hours or
based on other parameters like temperature, humidity, light
etc. (with available sensor in Shelly Cloud).
Shelly Cloud allows easy control and monitoring using a mo-
bile phone, tablet or PC.
Device Inclusion
To add a new Shelly device, install it to the power grid fol-
lowing the Installation Instructions included with the Device.
Step 1
After the installation of Shelly and the power is turned on
Shelly will create its own WiFi Access Point (AP).
WARNING:
In case the Device has not created its
own WiFi network with SSID like
shelly2led-35FA58
check if you have connected Shelly correctly by the schemes
described above. If you do not see an active WiFi network
with SSID like
shelly2led-35FA58
, reset the Device. To
restart - press and hold for 10 seconds the button/switch
connected to Shelly. Shelly will start blinking, then it should
return to AP Mode. If not, please repeat or contact our
customer support at:
Step 2
Choose “Add Device”.
In order to add more Devices later, use the app menu at the
top right corner of the main screen and click “Add Device”.
Type the name (SSID) and password for the WiFi network, to
which you want to add the Device.
Step 3
If using iOS:
you will see the following screen:
Press the home button of your iPhone/iPad/iPod. Open
Settings > WiFi and connect to the WiFi network created by
Shelly, e.g.
shelly2led-35FA58.
If using Android:
your phone/tablet will automatically scan
and include all new Shelly Devices in the WiFi network that
you are connected to.
Specification
Fig.1
LEGEND:
Input:
Power Supply
Output:
+ Power
Cold White
Warm White
Button/Switch
