Shel lab BACTRON300, Инструкция по установке и эксплуатации, Страница: 6 / 86

6 | P a g e
INTRODUCTION
Thank you for purchasing a Shel Lab BACTRON® Anaerobic Chamber Workstation. We know that
in today’s competitive marketplace, customers have many choices when it comes to constant
temperature equipment. We appreciate you choosing ours. Our continued reputation as a leading
laboratory product manufacturer rests with your satisfaction. Sheldon Manufacturing, Inc. stands
behind our products, and we will be there if you need us.
BACTRON workstations are intended for professional, industrial, and educational applications as
anaerobic workstations suitable for the cultivation of clinical bacteria. These units are not intended
for use at hazardous or household locations. Only use this equipment for its intended spectrum of
applications; any alterations or modifications void the warranty.
Before using the BACTRON read this entire manual carefully to understand how to install, operate,
and maintain the workstation in a safe manner. Keep this manual available for use by all
workstation operators. Ensure that all operators are given appropriate training prior to using the
BACTRON.
G
ENERAL
S
AFETY
C
ONSIDERATIONS
Note: Failure to follow the guidelines and instructions in this manual may create a protection
impairment by disabling or interfering w
ith the unit’s safety features. This can result in injury
or death.
Your BACTRON and its recommended accessories are designed and tested to meet strict safety
requirements. The workstation is built to connect to a wall power source using the specific power
cord type shipped with the unit.
For continued safe operation of your BACTRON, always follow basic safety precautions including:

Always plug the unit power cord into a protective earth grounded electrical outlet that
conforms to national and local electrical codes. If the unit is not grounded properly, parts
such as knobs and controls can conduct electricity and cause serious injury.

Avoid damaging the power cord. Do not bend it excessively, step on it, or place heavy
objects on it. A damaged cord can be a shock or fire hazard. Never use a power cord if it is
damaged or altered in any way.

Always position the unit so that end-users can quickly unplug it in the event of an
emergency.

Do not attempt to move the unit while in operation or before the unit has cooled.

Use only approved accessories. Do not modify system components. Alterations or
modifications to the unit can be dangerous and void the manufacturing defect warranty.

Follow all local ordinances in your area regarding the use of this unit. If you have any
questions about local requirements, please contact the appropriate agencies.

Ensure that the vacuum line from the vacuum pump to the workstation is not kinked, and
that the pump is placed in a location with adequate ventilation to avoid overheating.