Shearwater Petrel EXT, Руководство по эксплуатации, Страница: 63 / 65

Shearwater Petrel
Revision 1.1.0 63 Shearwater Research Inc.
Storage and Maintenance
The Petrel dive computer should be stored dry and clean�
Do not allow salt deposits to build up on your dive computer� Wash your computer with fresh
water to remove salt and other contaminants� Do not use detergents or other cleaning
chemicals as they may damage the Petrel dive computer� Allow to dry naturally before storing�
Do not wash under high pressure jets of water as it may cause damage to the depth sensor�
Store the Petrel dive computer out of direct sunlight in a cool, dry and dust free environment�
Avoid exposure to direct ultra-violet radiation and radiant heat�
Servicing
There are no user serviceable parts inside the Petrel�
Do not tighten or remove the faceplate screws�
Clean with water ONLY� Any solvents may damage the Petrel dive computer�
Service of the Petrel may only be done at Shearwater Research, or by any of our authorized
service centers�
Your nearest service center can be found at www�shearwaterresearch�com/contact
Fischer Pin-out
On the EXT model, the Fischer connector pin-out is as shown (looking into socket on Petrel)�
1 = Common - (GND)
2 = O2 Sensor 1+
3 = O2 Sensor 2+
4 = O2 Sensor 3+