Shaw SDHmini Bl, Инструкция по эксплуатации

Страница: 12 / 28

5.3 Display Options
The display can be changed by pressing the
following keys to cycle through all of the
graphical views.
Here is a view starting as a digital number followed by
simulated strip chart and moving coil instruments.
The digital display mode has the benefit of showing the moisture measurement
in main choice of engineering units but also a secondary display with perhaps
alternative engineering units. This mode also allows application of pressure
dewpoint to evaluate the measurement in other samples pressures.
5.4 Choice of Units
To choose the engineering units to be displayed, select the units key from
the main digital view.
You will be presented with the following screens to
select engineering units for the main and secondary
displays. You may toggle between adjusting the main
and secondary displays by pressing the key. In normal
measurement mode. The secondary display is the
measurement displayed in the top bar on the right hand side ( A ). It allows
alternative engineering units or concentrations to be displayed alongside those
chosen in the main display.
12
A