Shaw ATLAS PVR, Руководство пользователя

Страница: 15 / 44

15
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control
capabilities are locked to the cable converter. The
affected keys
*
are 1 through 0 , CH+ , CH- , ENTER , and
LAST . This will guarantee that you do not inadvertently
change a channel on your TV or VCR. However, you can
de-activate this feature to allow full access to these keys
in the
TV
and
VCR
modes.
*
NOTE: This feature does not affect the AUD mode.
Unlocking Channel Control
Now the remote control will provide TV and VCR
channel-control capabilities while in the TV or VCR
mode.
2. Press a mode key twice (i.e., AUX, DVD, AUD,
TV, or CBL ) to clear all the learned keys for
that mode. The LED blinks twice.
3. Repeat step 2 for another mode or press and
hold
SETUP to exit programming.
1. On the remote control, press
CBL
once; it will
blink once. Press and hold SETUP until the
CBL key blinks twice.
2. Enter
9 7 3
. The
CBL
key will blink twice.
3. Press
CH-
once. The
CBL
key will blink four
times.
Atlas Shaw M1055FR Rev 1 Eng only.fm Page 15 Wednesday, October 5, 2005 5:28 PM