12
7.
To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (e.g.,
AUX, DVD, AUD,
or
CBL
)
for the device you are searching for.
CHECKING THE CODES
If you have set up theAtlas PVR Universal Remote
Control by searching for your device code (on the
previous page), you may need to find out which four-
digit code is operating your equipment.
For example, to find out which code is operating your TV:
5.
To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g.,
AUX, DVD, AUD,
or
CBL
) for the device
you are checking. Write down the codes in the
appropriate boxes on page 10.
USING LEARNING
The Atlas PVR Universal Remote Control includes a
Learning
feature so you can add functions that are
unique to your home entertainment devices (e.g.,VCR
Tracking Up or Down). However, there are some
considerations.
Learning Precautions
•
Your original remote controls must be in working
order for learning to work properly.
1.
On the remote control, press
TV
once; it will
blink once. Then press and hold
SETUP
until
the
TV
key blinks twice.
2.
Enter
9 9 0
. The
TV
key will blink twice.
3.
To view the code for the first digit, press
1
once. Count the number of times the
TV
key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 10.
NOTE:
If a code digit is 0, the selected mode key will
not blink.
4.
Repeat step 3 three more times for the
remaining digits. Use
2
for the second digit,
3
for the third digit, and
4
for the fourth digit.
Finish writing down the code in the TV Code
boxes on page 10.
Atlas Shaw M1055FR Rev 1 Eng only.fm Page 12 Wednesday, October 5, 2005 5:28 PM
Содержание ATLAS PVR
Страница 1: ...ATLAS PVR Universal Remote Control Users Guide ...
Страница 44: ...44 M11055 FS ...
