To mount the camera, unlock the dome by rotating it one click counterclockwise. See side of the camera for
icons indicating locked and unlocked position. When unlocked, the dome will simply lift off.
This exposes the holes for the mounting screws. You can use the included self-tapping screws (with or
without the plastic anchors) to attach the camera to a wall or ceiling. A spare screw is included.
For your convenience a drilling template is included with the camera. The cable can be routed through a
hole in the wall or ceiling, or the cable can exit sideways if you remove the plastic trim piece that is held
with 2 screws.
You can adjust the lens angle by gently tilting or rotating the camera’s “eyeball”. Please be careful not to
force or overextend the internal lens cable. When done, re-attach the dome by lining up the unlock icon
and then turn the dome clockwise until it the lock icon is lined up.
