SHARX SECURITY HTNC Series, Руководство по API, Страница: 124 / 228

-124-
ch#_strm#_motion integer Motion Any Region 1 : active, 0 : inactive
ch#_strm#_motion_width integer
Grid Count of Frame
Width -
ch#_strm#_motion_height integer
Grid Count of Frame
Height -
ch#_strm#_motion_rgn# integer
Motion Detection of the
Region 1 : active, 0 : inactive
ch#_strm#_motion_rgn#_left integer
Left Grid Number of the
Region 1 ~
ch#_strm#_motion_width-1
ch#_strm#_motion_rgn#_right integer
Right Grid Number of
the Region 2 ~
ch#_strm#_motion_width
ch#_strm#_motion_rgn#_top integer
Top Grid Number of the
Region 1 ~
ch#_strm#_motion_height-1
ch#_strm#_motion_rgn#_bottom integer
Bottom Grid Number of
the Region 2 ~
ch#_strm#_motion_height
ch#_strm#_motion_rgn#_sen integer sensitivity of the Region 1 ~ 100
ch#_strm#_motion_rgn#_thre integer Threshold of the Region 1 ~ 100
ch#_strm#_motion_rgn#_act integer Activity of the Region 1 ~ 100
* # in ’ch#’, *’strm#’ means channel number and stream number, and # in ’rgn#’ means region id.
The ‘video loss’ Event Stream transmits Loss status of each Channel and Stream, and is made up of
the following Parameters
Table 5. VIDEO LOSS FULLTEXT RESPONSE PARAMETER
Parameter Type Description Value
ch#_strm#_vloss boolean Video Loss State 1 : loss, 0 : normal
* # in ’ch#’, *’strm#’ means channel number and stream number.
The ‘record’ Event Stream transmits Recording status of each Channel, and is made up of the
following Parameters.
Table 6. RECORD FULLTEXT RESPONSE PARAMETER
Parameter Type Description Value
ch#record boolean Recording 1 : recording, 0 : not recording
record_bad boolean Record Failed 1 : bad, 0 : normal
* # in ’ch#’ means channel number.
The ‘vca_event’ Event Stream is made up of the following Parameters.
Table 7. VCA EVENT FULLTEXT RESPONSE PARAMETER
Parameter Type Description Value
event_total_count integer Total number of detected events -
event_rule_type_# integer
Rule type of detected event 1 : line detector
2 : field detector
3 : absent
event_rule_index_# integer Rule index of detected event -
event_object_id_# integer array[] Object ID which triggered event -
event_line_counter_
#
integer array[2]
Number of objects crossed line
(line detector/counter only) array[0] : CW
array[1] : CCW
event_enter_mode_# integer
Field Detector Event mode 1 : ENTER
2 : EXIT
3 : APPEAR