shars 101-1008, Руководство по эксплуатации

Страница: 21 / 46

Version 1.0.4 dated 2014-09-19 Page 21 Original operating instructions
4 Operation
This grinding machine is generally designed to grind a single edge milling cutters (burins) but it
is also suitable to manufacture stamps, electrodes or round grinding parts and for regrinding of
end mills on the face. With the help of the workpiece supports which are available as accesso-
ries it is possible to grind round tool bits, milling cutters and drill bits.
By means of the versatile slewing and setting options all requirements are covered in order to
grind a graver with any cutter shape (e.g. cylindrical, conical, centric and eccentric radii). Fur-
thermore it is possible to create polygones (3- to 24- edge) on stamps and electrodes.
4.1 Safety
Operate the grinding machine for burins only under the following conditions:
m
The grinding machine for burins is in proper working order.
m
The grinding machine for burins is used as intended.
m
Follow the operating instructions.
m
All safety devices are installed and activated.
All failures should be eliminated immediately. Stop the grinding machine for burins immediately
in the event of any failure in operation and make sure that the grinding machine for burins can
not be started up accidentally or without authorization.
Notify the person responsible immediately of any modification.
"Safety during operation“ on page 12
Img.4-1: Grinding machine for burins and tools
Diamond disc
(Corundum disc
included in the scope
of delivery)
Bayonet locking
Scale
(Point angle)
Clamping lever
Dressing diamond
Clamping screw of
the shaft to
shift the grinding disc
Handwheel to
shift the grinding disc
Handwheel to
shift the
the tool holder
Hand wheel
shaft soulder