shars 101-1008, Руководство по эксплуатации

Страница: 19 / 46

Version 1.0.4 dated 2014-09-19 Page 19 Original operating instructions
3.3 Installation and assembly
3.3.1 Requirements regarding the installation site
INFORMATION
In order to attain good functionality and a high processing accuracy as well as a long durability
of the machine the installation site should fulfil certain criteria.
Please observe the following points:

The device must only be installed and operated in a dry and well-ventilated place.

Avoid places nearby machines generating chips or dust.

The installation site must be free from vibrations also at a distance of presses, planing ma-
chines, etc.

Any parts sticking out such as stops, handles, etc. have to be secured by measures taken by
the customer if necessary in order to avoid endangerment of persons.

Provide sufficient space for the staff preparing and operating the machine and transporting
the material.

Also consider that the machine is accessible for setting and maintenance works.
Provide for sufficient illumination (Minimum value at the working place: 300 lux).
If the illuminance is too little make sure to provide additional illumination.
INFORMATION
The mains plug of the grinding machine for burins must be freely accessible.
3.3.2 Electrical connection
 
"Qualification of personnel“ on page 8

Machine type 400V: Connect a CEE-400V-16A plug. We recommend you to use a CEE-
400V-16A plug with pole switch since the rotating field might change when you connect the
machine to another outlet.

Make sure to switch to the correct rotation direction. The rotation direction arrow is found on
the protective cover of the cup wheel.
3.3.3 Assembly

Turn the handwheel for the shaft shoulder into the seat thread.
Img.3-2: Handwheel shaft shoulder
12
Hand wheel