SharpEye 20/20MPI, Руководство пользователя и по обслуживанию

Страница: 62 / 64

SharpEye
TM
IR3 Flame Detector User Guide
62 Charging the Battery
B.5 Range
Table 14: Sensitivity Ranges
Sensitivity
(ft/m) Range
(ft/m) Extended Range
(ft/m)
33/10 2.3/0.7 -
65/20 4/1.2 8.2/2.5
100/30 6.6/2 13.2/4
132/40 10/3 20/6
* At extreme temperatures - 15% Max. Reduction in range
B.6 Charging the Battery
The flame simulator uses lithium/ion batteries as a rechargeable power
source. When the batteries are fully charged, the simulator operates at least
1,000 times without having to be recharged. The simulator will not operate
when the voltage from the batteries is lower than the required operational
level.
1 Simulator
2 Battery Pack
3 Locking Disc
4 Back Cover
Figure 14: Flame Simulator Battery Replacement
➣
To charge the battery:
1
Place the flame simulator on a table in a safe area, not exceeding
104°F/40°C.
2
Release the locking screw.
3
Unscrew the battery back cover (Item 4) counterclockwise.
4
Unscrew the locking disc (Item 3) clockwise.
5
Pull out the battery from the flame simulator.
www.acornfiresecurity.com
www.acornfiresecurity.com