Sharp XE-A177 Скачать руководство пользователя страница 97

Страница: 97 / 134

■

Zero skip

You can program whether or not to skip “0” in each report.

Procedure

Program each item as follows:

• DEPARTMENT (Use the selective entry)

SKIP:

Skips those data that are “0” in the department
report.

NOT SKIP: Does not skip those data that are “0” in the

department report.

• TRANSACTION (Use the selective entry)

SKIP:

Skips those data that are “0” in the transaction
report.

NOT SKIP: Does not skip those data that are “0” in the

transaction report.

• PLU (Use the selective entry)

SKIP:

Skips those data that are “0” in the PLU report.

NOT SKIP: Does not skip those data that are “0” in the PLU report.

• CLERK (Use the selective entry)

SKIP:

Skips those data that are “0” in the clerk report.

NOT SKIP: Does not skip those data that are “0” in the clerk report.

• HOURLY (Use the selective entry)

SKIP:

Skips those data that are “0” in the hourly report.

NOT SKIP: Does not skip those data that are “0” in the hourly report.

■

Print select

You can program whether or not to print the item on the report.

Procedure

Program each item as follows:

The screen continues.

• SEPARATOR LINE (Use the selective entry)

YES: Print the separate line on the report.
NO: Not to print the separate line on the report.

• Z COUNTER (Use the selective entry)

YES: Print the Z counter on the Z report.
NO: Not to print the Z counter on the Z report.

• GT1 ON Z (Use the selective entry)

YES: Print GT1 on the Z report.
NO: Not to print GT1 on the Z report.

• GT2 ON Z (Use the selective entry)

YES: Print GT2 on the Z report.
NO: Not to print GT2 on the Z report.

• GT3 ON Z (Use the selective entry)

YES: Print GT3 on the Z report.
NO: Not to print GT3 on the Z report.

• BAL GT ON Z (Use the selective entry) for XE-A217W/XE-A217B only

YES: Print the balance GT on the Z report.
NO: Not to print the balance GT on the Z report.

• TR GT ON Z (Use the selective entry)

YES: Print the training GT on the Z report.
NO: Not to print the training GT on the Z report.

Содержание XE-A177







































































































































Результаты поиска

Содержание XE-A177

Отзывы:

Sharp XE-A177, Подробное инструкционное руководство, Страница: 97 / 134

Результаты поиска

Содержание XE-A177

Отзывы: