Sharp UX-B800A, Руководство по обслуживанию, Страница: 60 / 140

UX-B800A
3 – 5
[3] Disassembly and assembly procedures
• This chapter mainly describes the disassembly procedures. For the assembly procedures, reverse the disassembly procedures.
• Easy and simple disassembly/assembly procedures of some parts and units are omitted. For disassembly and assembly of such parts and units,
refer to the Parts List.
• The numbers in the illustration, the parts list and the flowchart in a same section are common to each other.
• To assure reliability of the product, the disassembly and the assembly procedures should be performed carefully and deliberately.
1. Operation panel unit
Fig.1
1 Mechanism unit
6 Operation panel unit
3
2
4
5
Hook
Parts list (Fig. 1)
No. Part name Qty
1 Mechanism unit 1
2 Screw (3x6)
Damper rubber
1
4
3
Connector cover 1
1
5 Flat wire 1
6 Operation panel unit 1
NOTE:
For disassembly of the inside of the unit, refer to
the exploded view in the parts guide.