Sharp UX-B800A, Руководство по обслуживанию, Страница: 9 / 140

UX-B800A
1 – 8
2) Remove only the tape from the new cartridge.
• Make sure all tape is removed.
• CAUTION! DO NOT touch the gold contact area on the car-
tridge.
3) Make sure the cartridge holder is in the position shown. Place your
fingers on top of the holder and open the holder release.
• CAUTION! DO NOT touch the gold contact area or pull on the
cable.
• If you are replacing the cartridge, remove the old cartridge. If
you are going to use the old cartridge again, place it in an air-
tight container (containers for this purpose can be purchased at
most office supply stores).
4) Insert the new print cartridge ( ). Close the holder ( ), mak-
ing sure it clicks into place.
5) Close the cover, pressing firmly on both front corners.
Display: [CHANGE CARTRIDGE]/[1=NEW, 2=OLD].
6) Press (NEW) if the cartridge you installed is new.
Display: [NEW CARTRIDGE?] / [OK:PRESS START]
Press (OLD) if the cartridge you installed is old.
7) Press .
If you selected " OLD " in the previous step, this completes the
installation procedure. (Note: If you find that print quality is not sat-
isfactory, align the print cartridge.)
If you selected " NEW ", the machine will print an alignment page.
Continue with the steps below.
8) In the alignment page, locate the line that is closest to a straight
line.
In this example, "15" is closest to a straight line.
9) Enter the number of the straightest line with the number keys.
• To clear a mistake, press .
10)Press .
1
2
1
2
The machine is initially set to print high quality images, which require
more ink. If you prefer to use less ink and speed up drying time,
change the "INK SAVE MODE" setting to "ON".