manualshive.com logo in svg

Sharp SF-A18, Руководство по обслуживанию, Страница: 10 / 70

Поделиться
Скачать
Sharp SF-A18 Скачать руководство пользователя страница 10

2) SF-A57 RADF mode (duplex copy mode) copying

START

↓

Step 01:

The transport section is closed. (AUOD ON)

↓

Step 02:

An original is set on the original tray. (DSS
output HIGH)

↓

Step 03:

Original feed display ON

↓

Step 04:

Print SW ON

↓

(Preliminary 
paper feed):

*

A: For the first original, dummy paper exit

is performed.

↓

*

A

Step 05:

Paper feed motor (DFM) forward rotation
(Paper feed roller, semi-circular roller rotation)
Since the stopper is up, paper feed is not
performed.

↓

Step 06:

Reverse motor (DRM)  forward rotation
(Reverse roller, paper exit roller rotation)

↓

Step 07:

Transport motor (DTM) rotation
(Transport belt rotation)

↓

*

B: If there has been an original on the

tray, is discharged.

*

A

Step 08:

Paper feed motor (DFM) OFF
Paper feed solenoid (DFSOL) ON
(The weight plate and the stopper move down
to press the original onto the semi-circular
roller.)

↓

Step 09:

Paper feed motor (DFM) forward rotation
(Paper feed roller, semi-circular roller rotation)
The original feed is started.

↓

*

B

Step 10:

Reverse sensor (RDD) senses the lead edge
of the discharged original.
(RDD output HIGH)

↓

Step 11:

Original feed sensor (DFD) senses the lead
edge of the discharged original. (DFD output
HIGH)

↓

Step 12:

Paper feed motor (DFM) OFF
The original is stopped by the resist roller.

↓

Step 13:

Paper feed motor (DFM) reverse rotation
(Resist roller rotation)
The lead edge of the original is taken up by
the resist roller.)

↓

Step 

14:

Original width sensor (DWS) senses the
original width. (Output LOW)

↓

Step 15:

Original timing sensor (DTD) senses the lead
edge of the original. (DTD output HIGH)

↓

Step 16:

Paper feed motor (DFM) OFF
(The original is stopped with its lead edge
taken up by the resist roller.)

↓

*

B

Step 17:

Reverse sensor (RDD) senses the rear edge
of the discharged original. (RDD output LOW)
Reverse motor (DRM) rpm down

↓

Step 18:

Transport motor (DTM) OFF
(Transport stop)

↓

*

B

Step 19:

Original discharge

↓

Step 20:

Reverse motor (DRM) OFF
(Reverse roller, paper exit roller stop)
(Paper feed reverse)

↓

(Preliminary 
paper feed):

↓

Step 21:

Transport motor (DTM) forward rotation
Transport motor, reverse motor (DRM)
forward rotation (Reverse roller, paper exit
roller rotation)

↓

Step 22:

Paper feed motor (DFM) reverse rotation
(Resist roller rotation)
The original is sent to the transport section.

↓

Step 23:

Original feed sensor (DFD)
Senses the rear edge of the discharged
original. (DFD output LOW)

↓

*

C

Step 24:

Paper feed solenoid (DFSOL) OFF
(The weight plate and the stopper move up.)

↓

*

C: If there is no original on the original

tray, move up the stopper and the
weight plate.

Step 25:

Original width sensor (DWS) output HIGH

↓

Step 26:

Original timing sensor (DTD) senses the rear
edge of the original.
(DTD output LOW)
Paper feed motor (DFM) OFF (Resist roller
stop)
Reverse solenoid (DRSOL) ON (The flapper
move up.)

↓

Step 27:

Reverse sensor (RDD) senses the lead edge
of the original. (RDD output HIGH)

↓

Step 

28:

The lead edge of the original is moved
counterclockwise by the flapper.

↓

Step 29:

Transport motor (DTM) OFF
(Transport belt stop)

↓

Step 30:

Reverse motor (RDM) OFF
(Reverse roller, paper exit roller stop)

– 9 –

Содержание SF-A18







































































Отзывы:

Нет отзывов