Sharp ROUVO V, Руководство пользователя

Страница: 266 / 280

Specific Absorption Rate (SAR)
Your mobile device meets governmental regulations for radiation exposure.
Your phone includes a radio transmitter and receiver. This phone is designed
and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) set by the Federal Communications Commission (FCC) of
the U.S. Government. The RF emission limits set by FCC employs a unit of
measurement known as Specific Absorption Rate (SAR), which measures the
amount of RF energy absorbed by human body when using a mobile phone.
The applicable SAR limit defined by FCC for mobile communication device is
1.6 W/Kg (16 watts per kilogram). The limit is set with a substantial margin of
safety to assure the safety of the public as well as to account for any change
in ambient environments.
Tests of SAR measurements are conducted by following standard device
operating and testing positions under FCC guidelines with the phone
transmitting its highest certified power level across all tested frequency
bands. The maximum SAR values for this phone as reported to FCC are as
follows:
Head SAR 1.15 W/Kg
Body-worn SAR 0.99 W/Kg
Hotspot 0.99 W/Kg
Product specific (e.g. Phablet) 0.77 W/Kg
Simultaneous transmission 1.50 W/Kg
Maximum SAR values
The tested SAR results of this phone are based on highest certified power
level, however, the actual SAR values can well below the maximum values.
This is because the phone is designed to operate at multiple power levels
in order to meet the power efficiency for various operations. In general, the
lower the power output of the phone, the lower the SAR.
This phone has received Equipment Authorization from FCC. Detailed SAR
information of this phone including all the reported SAR values can be
found on
www.fcc.gov/oet/ea/fccid using the FCC ID of this phone device:
RYQSTTM21VAPP .
About body-worn testing
To test body-worn SAR value, this phone has been tested and meets the FCC
RF exposure guidelines for use with an accessory that contains no metal
substance. If no body-worn accessory is in use or if the phone is not used at
the head, position the phone at a minimum of 10 mm from your body when
the phone is powered on.
266