background image

R - 4 0 3 J K

In the interest of user-safety the oven should be restored to its original condition and only parts identical to those specified
should be used.

WARNING TO SERVICE PERSONNEL: Microwave ovens contain circuitry capable of producing very high voltage and
current, contact with following parts may result in a severe, possibly fatal, electrical shock. (High Voltage Capacitor,
High Voltage Power Transformer, Magnetron, High Voltage Rectifier Assembly,  High Voltage Harness etc..)

TABLE OF CONTENTS

Page

PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO
AVOID POSSIBLE  EXPOSURE TO EXCESSIVE MICROWAVE ENERGY .................. INSIDE FRONT COVER
BEFORE SERVICING ..................................................................................................... INSIDE FRONT COVER
WARNING TO SERVICE PERSONNEL .............................................................................................................. 1
MICROWAVE MEASUREMENT PROCEDURE .................................................................................................. 2
FOREWORD AND WARNING ............................................................................................................................. 3
PRODUCT SPECIFICATIONS ............................................................................................................................. 4
GENERAL  INFORMATION ................................................................................................................................... 4
KEY UNIT TEST .................................................................................................................................................... 6
CPU UNIT CIRCUIT ............................................................................................................................................... 8
PARTS LIST .......................................................................................................................................................... 9
PACKING AND ACCESSORIES ......................................................................................................................... 13

S34M235R403JE

R-403JK

MICROWAVE OVEN

MODEL

SUPPLEMENTAL SERVICE MANUAL

SHARP ELECTRONCS CORPORATION

This document has been published to be used for after
sales service only.
The contents are subject to change without notice.

Service Headquarters: Sharp Plaza, Mahwah, New Jersey, 07430-2135

R-403JK

This is a supplemental Service Manual for Microwave Oven model R-403JK. This model is quite similar to the base models
R408JK/JW; (S24M231R408JE).

This supplemental manual must be used in conjunction with the base model service manual for complete operation,
service, safety and replacement parts information.

Содержание R-403JK

















Отзывы: