Sharp PN-U553 страница 39 Скачать руководство пользователя

Страница: 39 / 54

Your monitor can be connected to a LAN allowing you to

control it from a PC on the LAN.

The connection requires a commercially available LAN cable

(UTP cable, Category 5, straight through).

Hub

LAN terminal

LAN cable (commercially available, straight)

Network (LAN)

TIPS

• You must assign an IP address to the monitor by following

the procedures in “Settings to connect to a LAN”. (See the

description on the right.)

• Your PC must be installed with Internet Explorer (version 7.0

or later).

- Version 7, 8, or 9 of Internet Explorer is recommended.

- Use Internet Explorer Version 10 in compatibility mode.

• To control the monitor via LAN, set RS-232C/LAN SELECT

to LAN, and STANDBY MODE to STANDARD.

• You cannot use RS-232C and LAN control simultaneously.

Controlling the Monitor with a PC (LAN)

Settings to connect to a LAN

Set the monitor’s IP address and subnet mask to match the

settings of your LAN.

These settings can be made on either the monitor or a PC

connected to the monitor.

The settings depend on the configuration of your LAN. Ask

your LAN administrator for details.

■ To set on the monitor

Set RS-232C/LAN SELECT of COMMUNICATION SETTING

on the SETUP menu to LAN, and then set the LAN SETUP

options. (See page 23.)

After setting each item, press

RETURN

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.
Press

to select items, and press

change the values.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.
Press

to select items, and press

change the values.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default

gateway.

If you are not using a gateway, specify “000.000.000.000”.

Press

to select items, and press

change the values.

Содержание PN-U553























































Результаты поиска

Содержание PN-U553

Отзывы:

Похожие инструкции для PN-U553

Бренды по названию

Популярные бренды

Sharp PN-U553, Руководство по эксплуатации

Результаты поиска

Содержание PN-U553

Отзывы:

Похожие инструкции для PN-U553

Бренды по названию

Популярные бренды