Sharp PGF310X - Notevision XGA DLP Projector, Руководство по эксплуатации

Страница: 36 / 76

32
Operating with the Remote Control
Displaying and Setting the
Break Timer
Press BREAK TIMER .
• The timer starts to count down from 5
minutes.
1
2
Press
P
/
R
/
O
/
Q
to adjust the
length of the break time.
• Increases with
P
or
Q
5 minutes
s
6 minutes
s
60 minutes
• Shortens with
O
or
R
4 minutes s 3 minutes s 1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
On-screen display
Canceling the break timer display function
Press BREAK TIMER .
• Break Timer does not function while the pro-
jector is operating the “Auto Sync”, “FREEZE”
or “AV MUTE” functions.
Note
Switching the Eco+Quiet
Mode
Press
E C O + Q U I E T
to switch the
Eco+Quiet mode between on and off.
• When the Eco+Quiet Mode is set to “ON”, the
sound of the cooling fan will turn down, the
power consumption will decrease, and the lamp
life will extend.
Press POINTER and press
P
/
R
/
O
/
Q
on the remote control to move
the pointer.
Displaying the Pointer
Press SPOT and press
P
/
R
/
O
/
Q
on the remote control to move the
spot area.
Using the Spot Function
1
Press POINTER again.
• The pointer will disappear.
2
1
Press SPOT again.
• The spot area will disappear.
2
• Refer to “Lamp Setting” on page 42 for de-
tails of the Eco+Quiet mode.
Note
POINTER button
ECO+QUIET button
Adjustment buttons
(
P
/
R
/
O
/
Q
)
BREAK TIMER button
SPOT button
AUTO SYNC button
FREEZE button
PICTURE MODE button
MAGNIFY buttons