Sharp PG-LW3000 Скачать руководство пользователя

Страница: 63 / 77

Appendix

Maintenance Indicators

■

The warning lights (power indicator, lamp indicator and temperature warning indicator) on the

projector indicate problems inside the projector.

■

If a problem occurs, either the temperature warning indicator or the lamp indicator will

illuminate red, and the projector will enter Standby mode. After the projector has entered

Standby mode, follow the procedures given below.

Top View

Lamp indicator

Temperature warning indicator

Power indicator

About the temperature warning indicator

If the temperature inside the projector increases, due to blockage of the air vents, or the setting

location, the temperature warning indicator will blink. And if the temperature keeps on rising,

“

” will illuminate in the lower left corner of the picture with the temperature warning

indicator blinking. If this state continues, the lamp will turn off, the cooling fan will run and then

the projector will enter Standby mode. When you find the temperature warning indicator

blinking, be sure to perform the measures described on page

About the lamp indicator

■

When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will

be displayed on the screen. When the percentage becomes 0%, it will change to (red), the

lamp will automatically turn off and then the projector will automatically enter Standby mode.

At this time, the lamp indicator will illuminate in red.

■

If you try to turn on the projector a fourth time without replacing the lamp, the

projector will not turn on.

Indicators on the Projector

Power indicator

Red on

Normal (Standby)

Green on

Normal (Power on)

Red blinks

Abnormal (See page

Green blinks

Normal (Cooling)

Lamp indicator

Green on

Normal

Green blinks

The lamp is warming up.

Red on

The lamp is shut down abnormally or requires to be

changed. (See page

Temperature

warning indicator

Off

Normal

Red on/Red blinks The internal temperature is abnormally high. (See page

Содержание PG-LW3000














































































Результаты поиска

Содержание PG-LW3000

Отзывы:

Похожие инструкции для PG-LW3000

Бренды по названию

Популярные бренды

Sharp PG-LW3000, Руководство по эксплуатации

Результаты поиска

Содержание PG-LW3000

Отзывы:

Похожие инструкции для PG-LW3000

Бренды по названию

Популярные бренды