Sharp PG-LW3000, Руководство по эксплуатации

Страница: 44 / 77

42
Picture Adjustment (“Picture” Menu)
Menu operation
n
Page 40
Q
PAGE1
Q
PAGE2
Picture Mode
Contrast 0
0
0
0
Bright
Color
Tint
0 Sharp
Standard
SEL./ADJ. ENTER END
0
0 Red
Blue
Picture SIG SCR PRJ1 PRJ2
1
2
Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting
C.M.S.
Standard
Film Mode
Eco+Quiet
0
1
On
Auto
Off
DNR Level 2
Reset
SEL./ADJ. ENTER END
7
6
5
4
2
3
Picture SIG SCR PRJ1 PRJ2
1
Selecting the Picture Mode
Selectable
items
Description
The default settings of each item when selecting Picture Mode
CLR Temp BrilliantColor
TM
Eco+Quiet
Standard For standard image 0 1 Off
Presentation Brightens portions of image for
more enhanced presentations.
0 2 Off
Movie Gives natural tint to the
projected image.
–1 0 On
Game Gives sharpness to the
projected image.
0 1 Off
*sRGB For high fidelity reproduction of
images from a computer.
– – Off
• “sRGB” is displayed only when RGB signal is input.
• You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are
retained in memory.
• You can also press PICTURE MODE on the remote control to select the Picture mode. (See page 35 .)
• *sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when “sRGB” is selected.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “BrilliantColor
TM
” and “C.M.S.”, when “sRGB” is
selected.
Note
Info
• When “sRGB” is selected, the projected image may become dark, but this does not indicate a
malfunction.