Sharp Notevision XG-P10XU Скачать руководство пользователя

Страница: 18 / 65

E-17

Operation

Basic Operations

When the power is on, the LAMP REPLACEMENT indicator
lights indicating the status of the lamp.

Green:

Lamp is ready.

Flashing green:

Warming up.

Red:

Change the lamp.

Press

INPUT

to select the desired input mode.

Press

INPUT

again to change the mode.

EXAMPLE

INPUT 1 Mode

INPUT 2 Mode

INPUT 3 (VIDEO) Mode

• When no signal is being received, “NO SIGNAL” will be displayed. When a signal that the projector is not

preset to receive is being received, “NOT REG.” will be displayed.

Press

VOLUME

to adjust the volume.

Press

MUTE

to temporarily turn off the sound.

Press

MUTE

again to turn the sound back on.

Press

POWER OFF

Press

POWER OFF

again while the message is displayed.

• If you accidentally pressed

POWER OFF

and do not want to turn off the power, wait until the power off

screen disappears.

• When

POWER OFF

is pressed twice, the POWER indicator will light up red and the cooling fan will run for

about 90 seconds. The projector will then enter standby mode.

• Wait until the cooling fan stops before disconnecting the power cord.
• The power can be turned on again by pressing

POWER ON

. When the power is turned on, the POWER

indicator and the LAMP REPLACEMENT indicator light green.

• The POWER indicator flashes if the bottom filter cover is not securely installed.

Press

Power ON

• The flashing green LAMP REPLACEMENT

indicator shows that the lamp is warming up.
Wait until the indicator stops flashing before
operating the projector.

• If the power is turned off and then immediately

turned on again, it may take a short while before
the lamp turns on.

• If the keylock level is set to “Level A” or “Level

B”,

Power ON

and

Power OFF

can only be used

on the remote control. (See page 41.)

• After the projector is unpacked and turned on for the first time, a slight odor may be emitted from the

exhaust vent. This odor will soon disappear with use.

Содержание Notevision XG-P10XU


































































Результаты поиска

Содержание Notevision XG-P10XU

Отзывы:

Похожие инструкции для Notevision XG-P10XU

Бренды по названию

Популярные бренды

Sharp Notevision XG-P10XU, Руководство по эксплуатации

Результаты поиска

Содержание Notevision XG-P10XU

Отзывы:

Похожие инструкции для Notevision XG-P10XU

Бренды по названию

Популярные бренды