Sharp MX-M623 Скачать руководство пользователя страница 151

Страница: 151 / 877

1-110

This completes the installation of the software. Next, configure the printer driver settings.

The License Agreement window will appear. Make sure that you understand the
contents of the license agreement and then click the [Continue] button.

A message will appear asking you if you agree to the terms of the license. Click the [Agree] button.

If the license appears in the different language, change the language in the language menu.

Select the hard drive where the PPD file
will be installed and click the [Continue]
button.

• Be sure to select the hard drive on which your operating

system is installed.

• In Mac OS X v10.6, the screen below appears when you

click the [Change Install Location] button.

Click the [Install] button.

Installation begins.

If the "Authenticate" window appears, enter the password and click the [OK] button.

When the message "The software was successfully installed" appears in the
installation window, click the [Close] button.

Select [Utilities] from the [Go] menu.

• If you are using Mac OS X v10.5 to 10.5.5 or v10.6, click

[System Preferences] in the Apple menu (

) and select

[Print & Fax] (

). When the screen for adding a printer

appears, click the

button and go to step 14.

• If you are using Mac OS X v10.2.8, select [Applications] from

the [Go] menu.

Содержание MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MX-M623

Отзывы:

Sharp MX-M623, Руководство по эксплуатации, Страница: 151 / 877

Результаты поиска

Содержание MX-M623

Отзывы: