manualshive.com logo in svg

Sharp MX-M503N, Руководство по эксплуатации, Страница: 276 / 806

Поделиться
Скачать
Sharp MX-M503N Скачать руководство пользователя страница 276

3-17

PRINTER

Contents

PRINTING

1

Select [Print] from the [File] menu of 
TextEdit.

In Mac OS 9, select [Print] from the [File] menu of 
SimpleText.

The menu used to execute printing may vary depending on the software application.

2

Make sure that the correct printer is 
selected.

The machine name that appears in the "Printer" menu is normally [SCxxxxxx]. ("xxxxxx" is a sequence of characters 
that varies depending on the machine model.)

3

Select print settings.

• In Mac OS X, click 

 next to [Copies & Pages] and 

select the settings that you wish to configure from the 
pull-down menu. The corresponding setting screen will 
appear. If the settings do not appear in Mac OS X v10.5 
to 10.5.5, click "

" next to the printer name.

• In Mac OS 9, click 

 next to [General] and select the 

settings that you wish to configure from the pull-down 
menu. The corresponding setting screen will appear.

Содержание MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов