Sharp MX-FR50U, Руководство по эксплуатации

Страница: 13 / 21

12
System settings
n
Clear All Memory
This program is used to manually clear all data from the memory and hard disk of the machine.
Note, however, that the following types of data are not cleared with this setting. Use
"Clear Address Book and Registered Data" (page 14 of this manual) to clear the
following types of data.
l
User Information
l
Individual/Group/Program/Relay Broadcast Memory Box
*
l Polling Memory/Confidential Memory Box
*
l
Sender Data
l Allow/Reject Reception Setting Data (including polling passcode number)
l
Forward Information
*
Image data stored in a memory box is cleared by executing "Clear All Memory".
When the [Clear All Memory] key is touched, a confirmation screen will appear as shown
below.
[Clear screen 1]
The confirmation message "Clear all memory. (Exclusive of address book/user list data.)"
will appear.
l
To return to the previous menu screen, touch the [No] key.
l To clear all memory, touch the [Yes] key. "Please wait." appears, and then the following
screen is displayed.
[Clear screen 2]
l
During clearing, progress will be shown as a
percentage together with the number of
repetitions.
l
When clearing is completed, the following
screen will appear for confirmation.
l
Even if data clearing is cancelled, the data availability is not secured.
If a print job is in progress when "Clear All Memory" is executed, the print job will
be canceled. Print jobs in progress and in the job queue are also erased.
If you wish to cancel data clearing...
Touch the [Cancel] key. The administrator password entry screen will appear.
Enter the administrator password. As soon as the correct password is entered,
data clearing will be canceled and the power will turn off briefly and then turn
back on automatically.
100 % 5 0 % 0 %
C learing all m e mo r y .
C ancel
(5 0 . 0 %) ( 1/1 Ti m e)