Sharp MX-C407F Скачать руководство пользователя страница 133

Страница: 133 / 200

Clearing jams

Avoiding jams

Load paper properly

•

Make sure that the paper lies flat in the tray.

Correct loading of paper Incorrect loading of paper

•

Do not load or remove a tray while the printer is printing.

•

Do not load too much paper. Make sure that the stack height is below the maximum paper fill indicator.

•

Do not slide paper into the tray. Load paper as shown in the illustration.

•

Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or

envelopes.

•

Push the tray firmly into the printer after loading paper.

Use recommended paper

•

Use only recommended paper or specialty media.

•

Do not load paper that is wrinkled, creased, damp, bent, or curled.

Clearing jams

133

Содержание MX-C407F









































































































































































































Результаты поиска

Содержание MX-C407F

Отзывы:

Sharp MX-C407F, Руководство пользователя, Страница: 133 / 200

Результаты поиска

Содержание MX-C407F

Отзывы: