manualshive.com logo in svg

Sharp MX-C311, Руководство по эксплуатации, Страница: 813 / 849

Поделиться
Скачать
Sharp MX-C311 Скачать руководство пользователя страница 813

8-4

TROUBLESHOOTING

Contents

(3) Paper misfeed in the fusing unit

If a paper misfeed has 
occurred inside the fusing 
unit, press down on the 
green part, open the fusing 
unit, and remove the paper.

(4) Paper misfeed in the transport area

When the rotate knob is 
turned in the direction of the 
arrow, paper comes out for 
above.

(5) Paper misfeed in the reversing unit

Open the right side cover, 
open the paper conveyor 
cover, and remove the 
paper.

If the misfeed is not in the 
above location, grasp the 
handle on the secondary 
transfer roller unit, slowly 
open the unit, and remove 
the paper.

(6) Paper misfeed in the bypass tray

Remove the misfed paper.

(7) Paper misfeed in tray 1 (side)

Open the right side cover 
and remove the misfed 
paper.

(8) Paper misfeed in tray 2 to tray 4 (side)

The misfeed may have 
occurred inside the machine. 
Check carefully and remove 
it.

Caution

The fusing unit area is hot. Take care not to 
burn yourself. (Do not touch any metal parts.)

Unfused toner may remain on the paper that is 
removed. Take care that it does not soil your hands or 
clothing.

When opening the paper reversing section, open slowly 
and gently. Jerking the section open may cause the 
secondary transfer roller unit to detach, resulting in failure.

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов