Sharp MX-C311 Скачать руководство пользователя страница 811 | Manualshive

Страница: 811 / 849

Sharp MX-C311 Скачать руководство пользователя страница 811

8-2

TROUBLESHOOTING

This section explains what to do when a paper misfeed occurs in the machine.

REMOVING MISFEEDS

When a paper misfeed occurs, the message "A misfeed has occurred." will appear in the touch panel and printing and
scanning will stop. In this event, touch the [Information] key in the touch panel. When the key is touched, instructions for
removing the misfeed will appear. Follow the instructions. When the misfeed is cleared, the message will automatically
clear.

The approximate locations of possible misfeeds are indicated by blinking

marks as shown below.

REMOVING MISFEEDS

Caution

The fusing unit is hot. Take care not to burn yourself when

removing a misfeed.

• When removing misfed paper, do not touch or damage the transfer belt.

• Carefully pull the paper out without tearing it.

• A misfeed may have occurred inside the machine. Check carefully and remove the

misfeed.

• If the paper tears, be sure to remove all pieces from the machine.

• While the message appears, printing and scanning cannot be resumed.

• If the message does not clear even after the misfeed has been removed, the causes below are possible. Check once

again.

- The misfeed was not correctly removed.

- A torn piece of paper remains in the machine.

- A cover or unit that was opened or moved to remove the misfeed was not returned to its original position.

Transfer
belt

Fusing unit

A misfeed has occurred.

Information

OK

misfeed location

«
...
809
810
811
812
813
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов