Sharp MX-C311 Скачать руководство пользователя страница 764 | Manualshive

Страница: 764 / 849

Sharp MX-C311 Скачать руководство пользователя страница 764

7-63

SYSTEM SETTINGS

Disabling of Devices

Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device.

Disabling of Document Feeder

Use this setting to prohibit the use of the automatic
document feeder, such as when the feeder malfunctions.
(When the setting is enabled, scanning is still possible
using the document glass.)

Disabling of Duplex

This is used to disable two-sided printing, such as when
the duplex module malfunctions.

Disabling of Optional Paper Feed
Unit

(When a 500-sheet paper feed unit is installed.)

This setting is used to disable a 500-sheet paper feed
unit, such as when it malfunctions.

Disabling of Tray Settings

This setting is used to prohibit tray settings (except for
the bypass tray).

Disabling of Offset

(When a finisher is installed.)

This setting is used to disable the offset function.

Disabling of Stapler

(When a finisher is installed.)

This setting is used to prohibit stapling, such as when
the stapler unit of the finisher malfunctions.

Disabling of Color Mode

(When a color-related problem has occurred.)

When a color-related problem has occurred and printing
is not possible, the use of color mode can be temporarily
prohibited. Black & white printing will still be allowed.

Fusing Control Settings

These are used to control the toner fusing temperature according to the weight of the paper.
These settings apply to plain paper, recycled paper, punched paper, pre-printed paper, letterhead paper, colored paper,
and user type paper.
You can select "16 to 23 lbs." or "23+ to 28 lbs." ("60

g

/m

2

to 89

g

/m

2

" or "90

g

/m

2

to 105

g

/m

2

").

This function is only for use as an emergency
measure. Once this setting is enabled, only a service
technician can cancel the setting. Promptly contact
your dealer or nearest SHARP service department to
have a service technician cancel the setting and
resolve the color-related problem.

• Be sure to use only paper that is in the same weight range as the weight range set here. Do not mix plain or other paper

that is outside the range with the paper in the tray.

• When settings are changed, the changes will take effect after the machine is restarted. To restart the machine see

"

TURNING THE POWER ON AND OFF

" (page 1-14) in "1. BEFORE USING THE MACHINE ".

«
...
762
763
764
765
766
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов