Sharp MX-C311 Скачать руководство пользователя страница 477 | Manualshive

Страница: 477 / 849

Sharp MX-C311 Скачать руководство пользователя страница 477

4-59

IMAGE CHECK SCREEN

This section explains the image check screen.

(1)

Information display

This shows information on the displayed image.

(2)

Preview image

An image of the selected received image appears.
If the image is cut off, use the scroll bars at the right and
bottom of the screen to scroll the image. Touch a bar and
slide it to scroll. (You can also touch the

keys to

scroll.)

(3)

Change page keys

When there are multiple pages, use these keys to
change pages.

•

keys: Go to the first or the last page.

•

keys: Go to the previous page or the next

page.

• Page number display: This shows the total number of

pages and the current page
number. You can touch the
current page number key and
enter a number with the
numeric keys to go to that page
number.

(4)

"Display Rotation" key

This rotates the image right or left by 90 degrees. The
rotation applies to all pages in the file, not just the
displayed page.

(5)

[Print] key

Touch to start printing.

(6)

Display zoom key

Use this to set the zoom ratio of the displayed image. The
setting applies to all pages in the file, not just the
displayed page.

(7)

Image select key

When multiple images are selected for preview display,
use this to change the displayed images.

0123456789

Image Check

04/04/2010 10:28

1 / 3

Display Rotation

Print

Back

0001

0010

(3)

(5)

(1)

(2)

(4)

(7)

(6)

A preview image is an image for display on the touch panel. It will differ from the actual print result.

«
...
475
476
477
478
479
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов