Sharp MX-C311 Скачать руководство пользователя страница 267

Страница: 267 / 849

2-31

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and
delete special original sizes.

Storing original sizes (editing/clearing)

Up to 12 special original sizes can be stored.
Touch the [Original] key in the base screen of copy mode and then follow the steps below.

Touch the [Custom Size] key.

Store the original size.

(1) Touch the [Store/Delete] tab.

(2) Touch a key for storing a custom original

size.

Touch a key that does not show a size (

If you wish to edit or clear a previously stored key...

Touch the key that you want to edit or clear. The following screen will appear.

• To edit the key, touch the [Modify] key and go to the next step.

• To clear the key, touch the [Delete] key. Make sure that the original size has been cleared and touch the [OK] key.

5½x8½

8½x13

8½x11

8½x14

8½x13

Custom Size

None

Original

Size Input

Inch

Original

X15½ Y 8½

Recall

Store/Delete

Custom Size

(1)

(2)

Modify

Delete

Cancel

A custom size has already been stored

in this location.

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MX-C311

Отзывы:

Sharp MX-C311, Руководство по эксплуатации, Страница: 267 / 849

Результаты поиска

Содержание MX-C311

Отзывы: