Sharp MX-C311 Скачать руководство пользователя страница 223 | Manualshive

Страница: 223 / 849

Sharp MX-C311 Скачать руководство пользователя страница 223

1-32

BEFORE USING THE MACHINE

IMPORTANT POINTS WHEN USING THE BYPASS TRAY

• When using plain paper other than SHARP standard paper or special media other than SHARP-recommended

transparency film, or when printing on the reverse side of previously used paper, the paper must be loaded one sheet
at a time. Loading more than one sheet at a time will cause misfeeds.

• Before loading paper, straighten any curling in the paper. If curled paper is not straightened, a misfeed may occur.
• When adding paper, remove any paper remaining in the bypass tray, combine it with the paper to be added, and

reload as a single stack. If paper is added without removing the remaining paper, a misfeed may result.

Inserting paper

Inserting transparency film

Place paper in the horizontal orientation.

• Use SHARP-recommended transparency film. When using

transparency film, place the film on the bypass tray with the rounded
corner at the left front. This ensures that the print side faces in the
correct direction.

• Do not touch the print side of transparency film.
• When loading multiple sheets of transparency film in the bypass tray,

be sure to fan the sheets several times before loading.

• When printing on transparency film, be sure to remove each sheet as it

exits the machine. Allowing sheets to stack in the output tray may
result in curling.

«
...
221
222
223
224
225
...
»

Содержание MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов